continuous still using proper maintenance methods

continuous still

Posted 10 months ago in News and Politics.

User Image

Do you know the proper use of maintenance methods in continuous still? Follow Shang Yun together to understand it! Before using continuous still, the reservoir should be cleaned with mild hot water and then sterilized with steam. The material grout enters the cylinder through a material tube secured to the cylinder head, or the head is opened and poured into the cylinder. Materials should not be installed too full to avoid material spatter when the mixer is stirred, resulting in unsanitary conditions or loss. To heat, you must close the refrigerant entry valve, release the remaining refrigerant in the jacket, then input the material, open the agitator, then open the steam valve. When the required temperature is reached, the steam valve should be closed first, and the agitator should be closed after 2-3 minutes.

1. Cooling method: Close the steam valve, put the remaining steam condensate in the jacket, and then open the refrigerant valve at the bottom of the cylinder to let the refrigerant pass through the jacket and reduce the temperature of the material in the cylinder.

2, insulation: according to the required temperature, start the agitator, high-speed valve, and keep the temperature (pay attention to the thermometer), in order to achieve the purpose of insulation.

3. Cleaning: after processing, put the remaining condensed water into the jacket in the cylinder, rinse with warm water as soon as possible, brush off the viscous materials, and then use 40C-50C to clean the alkali water on the inner wall of the container, and rinse with clean water. Next time use, use hot water or steam (90℃) above, keep the disinfection treatment for 2-3 minutes.

4. Maintenance: Always pay attention to the work of the whole juice beverage production line and reducer. When the reducer lubricating oil is insufficient, it should be replenished immediately and replaced every six months. When the equipment is not in use, the sheathing must be rinsed with warm water to avoid salt water corrosion. Often scrub the cylinder, keep the appearance clean, bright, durable purpose.

continuous still